Frequently Asked Questions
Click on the links to find the answers to the questions
Machine washing and cleaning
Condensation: during heavy activity, when relative humidity and temperature are high inside the garment, condensation will form on the inside face of the membrane. This can produce enough water inside the garment to convince the wearer that the membrane or coating is leaking.
Reduced breathability: water in the fabric next to the membrane / coating significantly reduces the rate at which body moisture is able to pass through the membrane to the outside air.
Increased garment weight: saturated outer fabrics adds weight to the garment. Condensation within the garment contributes to a noticeable weight gain, especially in garments that have wicking linings.
Normal detergents will leave a water-attracting residue on your outdoor clothing, therefore always use the appropriate Nikwax cleaner (Tech Wash or Down Wash) to clean your outdoor wear. Nikwax cleaners gently lift dirt and contaminants without harming the manufacturer's original DWR (Durable Water Repellency).
If your clothing is very dirty, has oil marks (etc) then you can use a detergent to remove the stains but you must then remove the detergent residue on the fabric with Tech Wash and re-waterproof with the appropriate Nikwax waterproofer to add the water-repellency.
No. Nikwax products have been tested by leading manufacturers and no harm or damage has ever been caused to washing machines or their components. Nikwax is safe for septic tanks and other drainage systems.
Durable Water Repellency (DWR)
Durable Water Repellency (DWR) is an invisible water-repellent finish applied to the outer fabric of most outdoor clothing and equipment. It prevents the fabric from absorbing water by making water bead up on the surface and roll off. Maintenance of the DWR with one of our cleaning products is vital to allow the fabric to breathe.
Most waterproof breathable jackets are machine washable but always read the care label first. Nikwax supports the use of machine washing with its products to provide fast, effective and even application.
Many people think their jacket or gear is leaking when the problem is often caused by perspiration condensing because the jacket isn't breathing properly. This may be because the DWR finish has worn off or is masked by dirt. Nikwax recommends you clean with Tech Wash and then use the appropriate proofing products to replenish the water repellency to get maximum performance from your gear. With Nikwax there's no need to tumble dry to activate the water-repellency.
Breathability and Wicking
The more you exercise, the hotter you get and the more you sweat. As the sweat evaporates it cools you down. Breathable garments allow the sweat vapor to escape, keeping you comfortable. If the sweat vapor is allowed to build up in your clothing, it becomes damp. Once you stop exercising, the damp clothing draws heat away causing your body to cool down very quickly. This can be dangerous in cold weather. It is important to maintain the breathability of your outdoor clothing.
Wicking is about moving sweat away from the skin. Any moisture that can be made to evaporate quickly and away from the skin will keep you cool and comfortable. Technically, there are many different types of wicking fabrics to choose from.
By immersing a garment in a wash-in treatment you apply a complete and even coating of the active ingredients to all the fibres, zips and threads. The treatment finds its way to the back of zips and pocket flaps, behind velcro tabs – all the places that are easy to miss with spray-on treatments. You do not miss any part. Clothing that is PU coated can be coated with a Nikwax waterproofing treatment by using our TX.Direct spray-on product to the outside of the garment only. This product means you can target specific areas of the jacket that need waterproofing anytime, anywhere.
As with all other treatments for leisure, work or sports activities, Nikwax Waterproofing treatments may slightly darken light or unusual coloured leather or fabric. However, our footwear range is specially formulated to minimise any change in colour or texture of the leather or fabric. Waterproof protection with minimal visual change is far better than the discolouring, staining and water-spotting of untreated footwear.
No. Nikwax treatments do not change the colour, texture or feel of garments or sleeping bags. Even on leather clothing it is safe to use Nikwax treatments to enhance the waterproof performance of leathers without impairing breathability as they do not contain harsh solvents that can harm the tannery-applied waterproofing.
Yes. Sometimes in delivery and also changes in temperature, will encourage the solution to set particularly if the product hasn't been used for any length of time. Just shake vigorously to re-disperse the solution and apply.
Rarely. If you have extremely hard water, using an additional capful of Nikwax cleaners will prevent formation of white residue from the calcium in your hard water.
We recommend that you do not allow your Nikwax products to freeze. Store under the kitchen sink or in a cool, dry place, rather than outside.
Nikwax guarantees the performance of all its products for 4 years. Every bottle is marked with the date of manufacture. An older product will not harm your garment.
Although there is water in Nikwax products, this evaporates to leave the water-repellency behind. An application of UV Proof, for example, results in a gain of 1 to 4% dependant upon type of fabric, condition of the fabric & how water-repellent it was already. As an example - Pertex gains less than 2% in weight. This is of course substantially less than the amount of water the fabric would soak up if it weren't water-repellent.
Nikwax treatments are highly effective and long lasting. Items that are properly treated (pre-washed with Nikwax Tech Wash, then treated with an appropriate Nikwax proofer such as Nikwax TX.Direct) will withstand 4 to 6 washes using Tech Wash. For an average use of outdoor clothing we recommend that you wash and re-proof your gear at least once a year.
Yes. We strongly recommend using Nikwax Tech Wash or one of our other cleaners as a pre-wash to remove dirt and any detergent residues that can prevent the waterproofing polymers from securely bonding to the fabric fibres. This helps maximize the performance and durability of waterproofing treatments. The last thing you want to do is waterproof over dirt!
It is advisable to inspect the seam tape if it is accessible. If you notice loose tape we recommend that it be professionally re-taped, cleaned and reproofed by the garment's manufacturer. Or you can glue them carefully with a clear glue such as Bostick and then clean in a gentle hand wash using Nikwax Tech Wash followed by a hand wash application of TX.Direct wash-in or spray-on. Air drying will revitalize the garment.
Sponge applicators are used in our footwear range. For all of our footwear, particularly nubuck and suede leather, it is essential you wet the footwear first under running water, apply Footwear Cleaning Gel if dirty and then rinse. If proofing is required use the appropriate Nikwax product. Always apply gently - there is no need to press hard onto the footwear. Alternatively try our spray applications for nubuck, suede and also fabric and leather combination footwear.
By preventing the build up of body odour and growth of microbes in the fabric.
We have created products that do not need heat to establish the bond between the waterproofing polymer and fabric. Yes, it's true. Using Nikwax products will achieve the same, if not better standard of water-repellency than competitor products without using heat. Unlike fluorocarbon treatments, Nikwax can simply be air dried which saves on having to go through an extra step of applying heat to make your gear water-repellent!
No. The performance of all Nikwax treatments is excellent with air drying.
On the side of all Nikwax WaterBased products is a statement that says "No propellant gases, non toxic, environmentally safe. Not tested on animals. Does not contain fluorocarbons".
Nikwax firmly believes in producing safe products and wherever possible, will not use components that have health or environmental concerns.
It means we use water to "carry" the waterproofing ingredients in the product. Anywhere that water can get into your footwear or clothing then so can the waterproofing, ie. it targets leaks. Using water also means we are not using harmful chemical solvents. Our products are completely safe for the user and the environment. WaterBased products are much more concentrated than others, therefore you get more waterproofing for your money. WaterBased products are EASIER to use, they are SAFER to use and keep you DRIER.
Nikwax first started looking at Fluorocarbons many years ago. We have
continued to test Fluoropolymers in the laboratory because they do have
desirable qualities such as oil repellency. However, competitors' fluoropolymer care products have shown to be vulnerable to abrasion and pressure.
In the past 4 years evidence has come out that components and potential breakdown products from fluoropolymers are highly persistent in the environment and in human tissue. Those chemicals have also proven to produce cancers in rats at extremely low concentrations. Nikwax considers that the use of such products in the domestic environment is an unacceptable risk and that there are safer routes to achieving durable water-repellency. Please refer to this link for more information: Fluorocarbons (PFCs)
Even though some manufacturers claim their products are ozone friendly, the propellants used are still powerful greenhouse gases and contribute to global warming. The solvents used are highly flammable and will contribute to greenhouse gases. Over 90 % of what the user buys inside the aerosol can, evaporates into the atmosphere and has no positive effects towards increasing water repellency. In contrast Nikwax WaterBased products contain much higher concentrations of proofing agents (up to 35 %), meaning less frequent applications, less waste and substantially less harm to the environment. We also seek to improve the recyclability of our packing to reduce waste.