Fabric & Leather Proof™
Easy to use WaterBased waterproofing for fabric and leather footwear.
Waterproofs, maintains support, texture and breathability of all combination footwear.
Breathable waterproof footwear is most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric or leather absorbs water, the breathability of the footwear will be reduced. Therefore, the Durable Water Repellency (DWR) of your footwear must be maintained to ensure comfort. It will eventually wear off and need to be renewed with Nikwax Fabric & Leather Proof™.
When you’re active and wearing footwear, your socks draw moisture away from your feet, keeping them dry. However, if your footwear absorbs water and ‘wets out’ its breathability will be reduced. Moisture vapour will not be able to escape through the material, so your feet will feel clammy and wet. Nikwax Fabric & Leather Proof™ adds Durable Water Repellency (DWR), which prevents water absorption, while maintaining breathability, keeping your feet dry and comfortable
Anyone who is active outside in damp or wet conditions will benefit from breathable waterproof footwear. Whether you’re a mountaineer, cyclist, dog walker, or you work outside as a farmer or surveyor, you will need good footwear.
Your footwear could be soaking up water just because it is dirty. First, try cleaning it with Nikwax Footwear Cleaning Gel™, and if it is fairly new, or recently re-waterproofed, the Durable Water Repellency (DWR) will be revitalized just from cleaning. But, once the footwear has been thoroughly worn you will need to add DWR, using Nikwax Fabric & Leather Proof™, after cleaning first with Nikwax Footwear Cleaning Gel™.
Alternative waterproofing products are often solvent-based aerosols; alternatively, they may be water-based and use fluorocarbons. Aerosol products are flammable. Fluorocarbons pose a potential risk to the environment and to the long-term health of the consumer.
Nikwax Fabric & Leather Proof™ is a safe product to use on breathable waterproof combination footwear. It is completely non-flammable, contains no volatile organic compounds (VOCs) and is fluorocarbon free. Nikwax Fabric & Leather Proof™ has been specifically designed and optimized for fabric and leather combination footwear, providing Durable Water Repellency (DWR) while maintaining breathability. You don’t need to wait for your footwear to dry before application.
Using the right cleaning product is as important as using the right waterproofing product. Conventional detergents leave behind a thin water-absorbent film on materials, which masks their Durable Water Repellency (DWR). Therefore, always clean your waterproof footwear with Nikwax Footwear Cleaning Gel™. Remember that dirt itself works against DWR, so regular cleaning will enhance performance.
Nikwax Fabric & Leather Proof™ is easy and quick to apply; either spray or sponge on to wet shoes. Nikwax Fabric & Leather Proof™ provides highly Durable Water Repellency (DWR) which develops on air drying. It leaves a flexible water repellent treatment on individual fibres of fabric and leather. This allows moisture vapour to pass through, maintaining breathability and keeping your feet dry. Nikwax Fabric & Leather Proof™ has been specifically designed and optimized for fabric and leather combination footwear.
Nikwax takes great care to minimize the effect of Nikwax products on the environment and on you, the consumer. Nikwax waterproofing products are WaterBased, non-aerosol, non-flammable, non-hazardous and environmentally friendly. They contain no harmful solvents or volatile organic compounds (VOCs), and are completely free of fluorocarbons (which have been shown to be persistent in the environment and have been associated with serious health issues).
Nikwax Fabric & Leather Proof™ is the product of choice of professional Outdoor trainers.
To find out more about people who are using Nikwax Fabric & Leather Proof™, and other Nikwax products, take a look at our testimonials page (coming soon).
- Brush off dirt with a damp cloth and clean using Nikwax Footwear Cleaning Gel™.
- Shake well before use. Press sponge applicator to break seal.
- Apply generously to wet footwear; Spray-On (from a distance of 5cm) or Sponge-On.
- After 2 minutes, remove surplus with a cloth and allow to dry before use.
Note: Light/colored fabric and/or leather may darken after treatment. Test on a hidden area first.
- Leave footwear to dry at room temperature.
- Paper can be stuffed into the toes to absorb excess moisture, this should be replaced when wet.
- Keep footwear away from fires and radiators, drying too quickly can crack leather and cause bonded soles to peel.