The easy to use, safe, high performance spray on waterproofing for wet weather clothing.
Adds Durable Water Repellency, revives breathability and maintains internal wicking properties.
Breathable waterproof garments are most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric absorbs water, the garment can lose up to 70% of its breathability. Therefore, the Durable Water Repellency (DWR) on the outer fabric of your jacket must be maintained to ensure comfort. It will eventually wear off and need to be renewed with Nikwax TX.Direct®.
When we work hard, we sweat. The evaporation of sweat cools us down and keeps us comfortable. But, when it rains we want to avoid getting wet, so we put on waterproof outerwear to keep us dry.
The waterproof fabric must allow moisture vapour to pass through it, or 'breathe'; otherwise our sweat cannot evaporate, causing us to overheat and get wet from condensation. Additionally, if the outer fabric of your garment absorbs water and ‘wets out’ its breathability will be reduced, causing you to feel clammy and wet.
Nikwax TX.Direct® adds Durable Water Repellency (DWR), which prevents water absorption, whilst maintaining breathability, keeping you dry and comfortable.
Anyone who is active outside in damp or wet conditions will benefit from breathable waterproof clothing. Whether you’re a mountaineer, cyclist, dog walker, or you work outside as a farmer or surveyor, you will need good raingear.
Your raingear could be soaking up water just because it is dirty. First, try cleaning it with Nikwax Tech Wash®, and if it is fairly new, or recently re-waterproofed, the Durable Water Repellency (DWR) will be revitalized just from cleaning. But, once the garment has been thoroughly worn, you will need to add DWR, using Nikwax TX.Direct®, after cleaning first with Nikwax Tech Wash®.
Breathable raingear with wicking linings needs Nikwax TX.Direct® Spray-On to maintain performance...
Alternative waterproofing products are often solvent-based aerosols; alternatively, they may be water-based and use fluorocarbons. Aerosol products are flammable. Fluorocarbons pose a potential risk to the environment and to the long-term health of the consumer.
Nikwax TX.Direct® Spray-On is a safe product to use on breathable waterproof items with wicking linings, or those that can’t be machine washed. It is WaterBased, non-flammable, contains no volatile organic compounds (VOCs) and is fluorocarbon free. Nikwax TX.Direct® Spray-On can be applied to the outer face fabric of waterproof clothing, providing Durable Water Repellency (DWR) without compromising internal wicking properties. It has been specifically designed and optimized for breathable waterproof clothing, providing DWR while maintaining breathability.
Nikwax TX.Direct® requires no heat to develop its DWR, so it is not necessary to use a tumble drier for best results. As garments with taped seams get older the tape adhesion weakens, becoming more fragile and susceptible to heat, so it is best to avoid tumble drying.
Using the right waterproofing product is important. Nikwax TX.Direct® Spray-On is fantastic for raingear with wicking linings, as it provides Durable Water Repellency (DWR) without impairing wicking properties. However, if wicking linings aren’t present, using Nikwax TX.Direct® Wash-In ensures you won’t miss any areas (complete DWR coverage!) and it’s easy to apply in a washing machine.
Nikwax TX.Direct® Spray-On is easy and quick to apply, and its highly Durable Water Repellency (DWR) develops on air drying. The need for tumble drying is removed, this saves energy and protects more vulnerable, older, garments from heat. Nikwax TX.Direct® Spray-On has been specifically designed and optimized for breathable waterproof garments; it leaves a flexible water repellent treatment on individual fibres allowing moisture vapour to pass through, maintaining breathability.
The spray-on application allows for direct treatment of areas which require it most (e.g. elbows and seams on jackets) and will not compromise the properties of internal wicking liners.
Nikwax takes great care to minimize the effect of Nikwax products on the environment and on you, the consumer. Nikwax waterproofing products are WaterBased, non-aerosol, non-flammable, non-hazardous and environmentally friendly. They contain no harmful solvents or volatile organic compounds (VOCs), and are completely free of fluorocarbons (which have been shown to be persistent in the environment and have been associated with serious health issues).
Nikwax TX.Direct® is the product of choice of professional Outdoor trainers.
To find out more about people who are using Nikwax TX.Direct®, and other Nikwax products, take a look at our testimonials page (coming soon).
For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash®. No need to dry item(s) before waterproofing.
- Protect working surface and lay clean garment flat and zip up all zippers.
- Hold bottle 15 cm/6 inches away from garment.
- Apply evenly to outside of fabric.
- Wait for 2 minutes. Remove any surplus product with a damp cloth.
- Check carefully to ensure no areas have been missed.
- After several minutes check for and remove any surplus product with a damp cloth.
Air dry or tumble dry on a low setting if care label allows.